Double edging: Crochet Lace Edging Generator

Two attached sides from one foundation

This decorative insertion strip uses twenty-four foundation chains as shared bases for two separately attached shell edges. Side A uses one selected loop of each chain, and side B uses the unused opposite loop. The goal is understanding that two edges can share a foundation without becoming two stacked crochet rows. The ends remain unjoined. The construction is neither a closed oval round nor an instruction to crochet the second side into the tops of the first side's shells.

Make the chain loops inspectable

Choose smooth yarn and a hook that gives a relaxed, identifiable foundation. Chain twenty-four loosely and mark both ends. Fasten off the foundation by drawing its cut tail completely through the active loop without adding another chain, and retain both foundation tails for weaving. Before attaching the edging, identify the loop set intended for side A and confirm that the opposite loop remains available along the whole chain. If the foundation twists or tightens beyond recognition, remake it before adding fans. Keep a separate short yarn supply for the second attachment and allow enough tails for secure finishing.

Work four repeats on side A

Attach at the first end and make one uncounted chain. Skip two chain bases, work five double crochets into the next base, skip two and slip stitch into the next. Repeat that six-base unit four times. Twenty-four bases have now been assigned: sixteen skipped positions and eight worked positions. The twenty completed double crochets and four closing slips give a main count of twenty-four. Fasten off rather than continuing around the end.

Rotate the foundation for side B

Rotate the strip one hundred eighty degrees within its plane so the unused opposite loops can be read from the other end. Attach fresh yarn there. Work the same four shell repeats into those unused foundation loops. The side B source order therefore runs opposite to side A in the diagram. Do not insert into the already made fans, and do not add end stitches to connect the two sides into a continuous circuit.

Count the shared and separate quantities

The original foundation still contains twenty-four chains. Two attachments produce forty double crochets and eight closing slip stitches altogether, giving forty-eight completed edging stitches. Saying that each side consumes twenty-four bases describes reuse of different loops, not forty-eight newly created foundation chains. Finish both attachments, weave their four yarn tails and the two foundation tails, and lay the strip flat. This independently fastened foundation and two separately attached sides have six tails. Continuing the foundation yarn directly into Side A would instead leave four tails, but that is an alternative attachment choice rather than the separately fastened method described here. Its actual width and tendency to curl must be assessed in the finished yarn sample before using it as an insertion between fabrics.

Questions and troubleshooting

Why are both shell rows on the same side?

Check which foundation loops received side B. Working into the tops of side A or reusing its selected loops does not match this opposite-loop construction.

Can I join the ends into a bracelet?

A closure and its loading behavior need a separate measured design. The supplied pattern deliberately leaves both ends open.

Should the two edges have separate foundations?

Not here. They share one twenty-four-chain base. Two independent strips sewn together would be a different construction with a different seam budget.

Restore the exact construction

Download the exact saved edge JSON and restore it in the Crochet Lace Edging Generator. Use US terms and yarn #98536E. The selected layout is double, with 24 base positions in the shared chain foundation. In UK terminology US sc is dc and US dc is tr. See the chart-reading guide for symbols and source-map interpretation.

1. Foundation: ch24 loosely; these 24 chains are bases, not a turning lift. Fasten off the foundation securely without adding another chain and retain both tails. Side A: attach yarn at the first end and use one selected loop of each chain. Ch1 (not counted). Repeat [skip2chain bases,5dc in next chain base, skip2bases, sl st in next] 4 times. 20 dc and 4 sl. Fasten off and weave in; do not continue around an end. Main count: 24.
2. Side B: rotate the foundation180degrees in its plane. Attach fresh yarn at the opposite end, using the unused opposite loop of each original chain. Ch1 (not counted). Repeat [skip2chain bases,5dc in next chain base, skip2bases, sl st in next] 4 times. 20 dc and 4 sl. Fasten off and weave in; do not continue around an end. Main count: 24.