SKEINORA

Rectangular tote: Crochet Bag Panel Generator

Build five body panels with a gauge-aware base

This small rectangular tote study uses two twenty-four-by-twelve SC faces, two five-by-twelve gussets, a twenty-four-by-six base and two four-by-thirty handles. The faces contribute 576 sc, gussets 120, base 144 and handles 240: 1, 080 main outputs in seven pieces. Every panel starts from its own width-plus-one foundation and turns with an excluded chain one.

Convert gusset width into base rows deliberately

The saved SC gauges are twenty stitches and twenty-four rows over ten centimeters. Five gusset stitches are nominally two and a half centimeters wide; six base rows represent that same nominal distance. Treating five stitches as five rows would ignore the distinct gauges. The twenty-four-stitch face is nominally twelve centimeters wide and its twelve rows five centimeters high, so the example is a construction study rather than a full-size shopping-bag specification.

Keep all four bottom corners identifiable

Pin outside faces outward and label front-left, front-right, back-left and back-right on the base. Four vertical seams pair twelve row ends each. Front and back foundation edges meet the two twenty-four-post base edges, reversing the outside-view back numbering. Each gusset bottom has five posts to meet six base row ends; the supplied balanced list repeats a receiving post to distribute that mismatch. Compare real lengths before sewing.

Leave the mouth open and reinforce handles

On each face, attach one handle end at final-row positions two through five and its other end at twenty through twenty-three. Four tacks per end make sixteen across both handles. Pin loop height and remove twists before reinforcing. The top between those ends remains the mouth. A complete seam count does not prove load capacity or control real yarn stretch.

What if the base gathers?

Recheck the washed stitch and row gauges and temporary pair distribution. Do not force mismatched lengths together with a tighter seam.

Can I obtain a larger bag by printing larger?

Printing changes a drawing, not the crochet count. Change supported inputs and swatch the resulting construction.

Exact settings, stitch key and full original route

Open the Crochet Bag Panel Generator and choose boxed. Use width twenty-four, body rows twelve, gusset width five, strap rows thirty, flap rows six, base growth four, wall rounds twelve, motif frame setting two and bag cord foundation seventy-two. Enter measured SC gauges twenty stitches and twenty-four rows per ten centimeters. Inactive settings do not resize a fixed source. Download the complete original bag project JSON before making changes.

Use compatible yarn, a matching hook, removable part and corner markers, scissors and a tapestry needle. US sc means single crochet, dc double crochet, ch chain and sl st slip stitch; UK mode translates the stitch names without changing the source geometry or quantities. Follow the complete cluster and back-loop definitions where used. Component row counts describe one copy. Main crochet outputs, extra chains, sewing pairs, basting and threading references have different units. Review the gauge guide and chart-reading guide before comparing measurements and receiving edges.

The original SVG below shows the actual generated component charts and a linked assembly register. Written references supply the complete seam route. Stitch Preview draws corresponding loop schematics; neither view is a real photograph or proof of a physically tested bag. Wash and measure the actual fabrics, pin every seam, preserve the named opening and reinforce the stated attachments. Record real dimensions, yarn behavior and finishing alongside the saved JSON before deciding how the finished sample will be used.

Front and back body panels · make 2 · project yarn 1END: Row 12 → · dashed ring = final stitchBlue ring = first worked stitch in each row; edge ch is separate.Row 1 ← · 24 stsch ↶Row 2 → · 24 stsch ↶Row 3 ← · 24 stsch ↶Row 4 → · 24 stsch ↶Row 5 ← · 24 stsch ↶Row 6 → · 24 stsch ↶Row 7 ← · 24 stsch ↶Row 8 → · 24 stsch ↶Row 9 ← · 24 stsch ↶Row 10 → · 24 stsch ↶Row 11 ← · 24 stsch ↶Row 12 → · 24 stsch ↶FoundationSTART → Foundation: 25 chains. Chain 25. Begin at right; work toward left.Turning chain excluded from stitch count. Row 1 starts in chain 2 from hook.Key (US): sc. Each symbol = one stitch; use Written Pattern for insertion and chain height.Left and right gussets · make 2 · project yarn 2END: Row 12 → · dashed ring = final stitchBlue ring = first worked stitch in each row; edge ch is separate.Row 1 ← · 5 stsch ↶Row 2 → · 5 stsch ↶Row 3 ← · 5 stsch ↶Row 4 → · 5 stsch ↶Row 5 ← · 5 stsch ↶Row 6 → · 5 stsch ↶Row 7 ← · 5 stsch ↶Row 8 → · 5 stsch ↶Row 9 ← · 5 stsch ↶Row 10 → · 5 stsch ↶Row 11 ← · 5 stsch ↶Row 12 → · 5 stsch ↶FoundationSTART → Foundation: 6 chains. Chain 6. Begin at right; work toward left.Turning chain excluded from stitch count. Row 1 starts in chain 2 from hook.Key (US): sc. Each symbol = one stitch; use Written Pattern for insertion and chain height.Base panel · make 1 · project yarn 2END: Row 6 → · dashed ring = final stitchBlue ring = first worked stitch in each row; edge ch is separate.Row 1 ← · 24 stsch ↶Row 2 → · 24 stsch ↶Row 3 ← · 24 stsch ↶Row 4 → · 24 stsch ↶Row 5 ← · 24 stsch ↶Row 6 → · 24 stsch ↶FoundationSTART → Foundation: 25 chains. Chain 25. Begin at right; work toward left.Turning chain excluded from stitch count. Row 1 starts in chain 2 from hook.Key (US): sc. Each symbol = one stitch; use Written Pattern for insertion and chain height.Handles · make 2 · project yarn 1END: Row 30 → · dashed ring = final stitchBlue ring = first worked stitch in each row; edge ch is separate.Row 1 ← · 4 stsch ↶Row 2 → · 4 stsch ↶Row 3 ← · 4 stsch ↶Row 4 → · 4 stsch ↶Row 5 ← · 4 stsch ↶Row 6 → · 4 stsch ↶Row 7 ← · 4 stsch ↶Row 8 → · 4 stsch ↶Row 9 ← · 4 stsch ↶Row 10 → · 4 stsch ↶Row 11 ← · 4 stsch ↶Row 12 → · 4 stsch ↶Row 13 ← · 4 stsch ↶Row 14 → · 4 stsch ↶Row 15 ← · 4 stsch ↶Row 16 → · 4 stsch ↶Row 17 ← · 4 stsch ↶Row 18 → · 4 stsch ↶Row 19 ← · 4 stsch ↶Row 20 → · 4 stsch ↶Row 21 ← · 4 stsch ↶Row 22 → · 4 stsch ↶Row 23 ← · 4 stsch ↶Row 24 → · 4 stsch ↶Row 25 ← · 4 stsch ↶Row 26 → · 4 stsch ↶Row 27 ← · 4 stsch ↶Row 28 → · 4 stsch ↶Row 29 ← · 4 stsch ↶Row 30 → · 4 stsch ↶FoundationSTART → Foundation: 5 chains. Chain 5. Begin at right; work toward left.Turning chain excluded from stitch count. Row 1 starts in chain 2 from hook.Key (US): sc. Each symbol = one stitch; use Written Pattern for insertion and chain height.Component and seam register — mouth stays openFront and back body panelsRecipe 1 · quantity 2Flat source · 12 steps per copySchematic outline;follow counted chart above.Left and right gussetsRecipe 2 · quantity 2Flat source · 12 steps per copySchematic outline;follow counted chart above.Base panelRecipe 3 · quantity 1Flat source · 6 steps per copySchematic outline;follow counted chart above.HandlesRecipe 4 · quantity 2Flat source · 30 steps per copySchematic outline;follow counted chart above.Vertical body seam · 12 sewing reference pairsFront and back body panels #1 left row ends (12) → Left and right gussets #1 right row ends (12).Vertical body seam · 12 sewing reference pairsFront and back body panels #2 right row ends (12) → Left and right gussets #1 left row ends (12).Vertical body seam · 12 sewing reference pairsFront and back body panels #1 right row ends (12) → Left and right gussets #2 left row ends (12).Vertical body seam · 12 sewing reference pairsFront and back body panels #2 left row ends (12) → Left and right gussets #2 right row ends (12).Front to base · 24 sewing reference pairsFront and back body panels #1 foundation posts (24) → Base panel #1 foundation edge posts (24).Back to base · 24 sewing reference pairsFront and back body panels #2 foundation posts (24) → Base panel #1 top edge posts (24).Left gusset to base · 6 sewing reference pairsLeft and right gussets #1 foundation posts (5) → Base panel #1 left row ends (6).Right gusset to base · 6 sewing reference pairsLeft and right gussets #2 foundation posts (5) → Base panel #1 right row ends (6).OPEN: Top rim stays openArrows link named edges,not crochet working direction. Full pair lists and reinforcing steps are written.Pin measured fabrics first. These outlines do not certify physical fit,rigidity or load capacity.Each source chart describes one copy. Follow its own foundation, direction, repeats and finish.Project yarn slots retain their actual colors; component legends describe their local recipes.1: #4F73812: #BD7969Assembly 1: 12 sewing reference pairs · use the linked complete step.Assembly 2: 12 sewing reference pairs · use the linked complete step.Assembly 3: 12 sewing reference pairs · use the linked complete step.Assembly 4: 12 sewing reference pairs · use the linked complete step.Assembly 5: 24 sewing reference pairs · use the linked complete step.Assembly 6: 24 sewing reference pairs · use the linked complete step.Assembly 7: 6 sewing reference pairs · use the linked complete step.Assembly 8: 6 sewing reference pairs · use the linked complete step.Assembly 9: 16 handle-to-rim attachment tacks · use the linked complete step.Working order · USSTART Front and back body panels · Row 1 ←· 24 counted outputs per copyFront and back body panels · Row 2 → · 24counted outputs per copyFront and back body panels · Row 3 ← · 24counted outputs per copyFront and back body panels · Row 4 → · 24counted outputs per copyFront and back body panels · Row 5 ← · 24counted outputs per copyFront and back body panels · Row 6 → · 24counted outputs per copyFront and back body panels · Row 7 ← · 24counted outputs per copyFront and back body panels · Row 8 → · 24counted outputs per copyFront and back body panels · Row 9 ← · 24counted outputs per copyFront and back body panels · Row 10 → · 24counted outputs per copyFront and back body panels · Row 11 ← · 24counted outputs per copyFront and back body panels · Row 12 → · 24counted outputs per copyLeft and right gussets · Row 1 ← · 5counted outputs per copyLeft and right gussets · Row 2 → · 5counted outputs per copyLeft and right gussets · Row 3 ← · 5counted outputs per copyLeft and right gussets · Row 4 → · 5counted outputs per copyLeft and right gussets · Row 5 ← · 5counted outputs per copyLeft and right gussets · Row 6 → · 5counted outputs per copyLeft and right gussets · Row 7 ← · 5counted outputs per copyLeft and right gussets · Row 8 → · 5counted outputs per copyLeft and right gussets · Row 9 ← · 5counted outputs per copyLeft and right gussets · Row 10 → · 5counted outputs per copyLeft and right gussets · Row 11 ← · 5counted outputs per copyLeft and right gussets · Row 12 → · 5counted outputs per copyBase panel · Row 1 ← · 24 counted outputsper copyBase panel · Row 2 → · 24 counted outputsper copyBase panel · Row 3 ← · 24 counted outputsper copyBase panel · Row 4 → · 24 counted outputsper copyBase panel · Row 5 ← · 24 counted outputsper copyBase panel · Row 6 → · 24 counted outputsper copyHandles · Row 1 ← · 4 counted outputs percopyHandles · Row 2 → · 4 counted outputs percopyHandles · Row 3 ← · 4 counted outputs percopyHandles · Row 4 → · 4 counted outputs percopyHandles · Row 5 ← · 4 counted outputs percopyHandles · Row 6 → · 4 counted outputs percopyHandles · Row 7 ← · 4 counted outputs percopyHandles · Row 8 → · 4 counted outputs percopyHandles · Row 9 ← · 4 counted outputs percopyHandles · Row 10 → · 4 counted outputs percopyHandles · Row 11 ← · 4 counted outputs percopyHandles · Row 12 → · 4 counted outputs percopyHandles · Row 13 ← · 4 counted outputs percopyHandles · Row 14 → · 4 counted outputs percopyHandles · Row 15 ← · 4 counted outputs percopyHandles · Row 16 → · 4 counted outputs percopyHandles · Row 17 ← · 4 counted outputs percopyHandles · Row 18 → · 4 counted outputs percopyHandles · Row 19 ← · 4 counted outputs percopyHandles · Row 20 → · 4 counted outputs percopyHandles · Row 21 ← · 4 counted outputs percopyHandles · Row 22 → · 4 counted outputs percopyHandles · Row 23 ← · 4 counted outputs percopyHandles · Row 24 → · 4 counted outputs percopyHandles · Row 25 ← · 4 counted outputs percopyHandles · Row 26 → · 4 counted outputs percopyHandles · Row 27 ← · 4 counted outputs percopyHandles · Row 28 → · 4 counted outputs percopyHandles · Row 29 ← · 4 counted outputs percopyHandles · Row 30 → · 4 counted outputs percopyFinishing / assembly reference 61 • · 12sewing reference pairsFinishing / assembly reference 62 • · 12sewing reference pairsFinishing / assembly reference 63 • · 12sewing reference pairsFinishing / assembly reference 64 • · 12sewing reference pairsFinishing / assembly reference 65 • · 24sewing reference pairsFinishing / assembly reference 66 • · 24sewing reference pairsFinishing / assembly reference 67 • · 6sewing reference pairsFinishing / assembly reference 68 • · 6sewing reference pairsEND Finishing / assembly reference 69 • ·16 handle-to-rim attachment tacksBlue marker = first group; dashed = last group.Read chain / join / repeat details in linked steps.

All component rows, rounds, seams and attachment references

  1. Front and back body panels (make 2), row 1: Ch 25. Starting in chain 2 from hook, work sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc. [24 counted outputs per copy]
  2. Front and back body panels (make 2), row 2: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc. [24 counted outputs per copy]
  3. Front and back body panels (make 2), row 3: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc. [24 counted outputs per copy]
  4. Front and back body panels (make 2), row 4: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc. [24 counted outputs per copy]
  5. Front and back body panels (make 2), row 5: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc. [24 counted outputs per copy]
  6. Front and back body panels (make 2), row 6: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc. [24 counted outputs per copy]
  7. Front and back body panels (make 2), row 7: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc. [24 counted outputs per copy]
  8. Front and back body panels (make 2), row 8: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc. [24 counted outputs per copy]
  9. Front and back body panels (make 2), row 9: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc. [24 counted outputs per copy]
  10. Front and back body panels (make 2), row 10: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc. [24 counted outputs per copy]
  11. Front and back body panels (make 2), row 11: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc. [24 counted outputs per copy]
  12. Front and back body panels (make 2), row 12: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc. Fasten off, weave in ends and block the completed motif without stretching. [24 counted outputs per copy]
  13. Left and right gussets (make 2), row 1: Ch 6. Starting in chain 2 from hook, work sc, sc, sc, sc, sc. [5 counted outputs per copy]
  14. Left and right gussets (make 2), row 2: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc. [5 counted outputs per copy]
  15. Left and right gussets (make 2), row 3: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc. [5 counted outputs per copy]
  16. Left and right gussets (make 2), row 4: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc. [5 counted outputs per copy]
  17. Left and right gussets (make 2), row 5: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc. [5 counted outputs per copy]
  18. Left and right gussets (make 2), row 6: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc. [5 counted outputs per copy]
  19. Left and right gussets (make 2), row 7: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc. [5 counted outputs per copy]
  20. Left and right gussets (make 2), row 8: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc. [5 counted outputs per copy]
  21. Left and right gussets (make 2), row 9: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc. [5 counted outputs per copy]
  22. Left and right gussets (make 2), row 10: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc. [5 counted outputs per copy]
  23. Left and right gussets (make 2), row 11: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc. [5 counted outputs per copy]
  24. Left and right gussets (make 2), row 12: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc. Fasten off, weave in ends and block the completed motif without stretching. [5 counted outputs per copy]
  25. Base panel (make 1), row 1: Ch 25. Starting in chain 2 from hook, work sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc. [24 counted outputs per copy]
  26. Base panel (make 1), row 2: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc. [24 counted outputs per copy]
  27. Base panel (make 1), row 3: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc. [24 counted outputs per copy]
  28. Base panel (make 1), row 4: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc. [24 counted outputs per copy]
  29. Base panel (make 1), row 5: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc. [24 counted outputs per copy]
  30. Base panel (make 1), row 6: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc, sc. Fasten off, weave in ends and block the completed motif without stretching. [24 counted outputs per copy]
  31. Handles (make 2), row 1: Ch 5. Starting in chain 2 from hook, work sc, sc, sc, sc. [4 counted outputs per copy]
  32. Handles (make 2), row 2: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  33. Handles (make 2), row 3: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  34. Handles (make 2), row 4: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  35. Handles (make 2), row 5: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  36. Handles (make 2), row 6: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  37. Handles (make 2), row 7: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  38. Handles (make 2), row 8: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  39. Handles (make 2), row 9: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  40. Handles (make 2), row 10: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  41. Handles (make 2), row 11: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  42. Handles (make 2), row 12: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  43. Handles (make 2), row 13: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  44. Handles (make 2), row 14: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  45. Handles (make 2), row 15: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  46. Handles (make 2), row 16: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  47. Handles (make 2), row 17: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  48. Handles (make 2), row 18: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  49. Handles (make 2), row 19: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  50. Handles (make 2), row 20: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  51. Handles (make 2), row 21: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  52. Handles (make 2), row 22: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  53. Handles (make 2), row 23: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  54. Handles (make 2), row 24: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  55. Handles (make 2), row 25: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  56. Handles (make 2), row 26: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  57. Handles (make 2), row 27: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  58. Handles (make 2), row 28: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  59. Handles (make 2), row 29: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
  60. Handles (make 2), row 30: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. Fasten off, weave in ends and block the completed motif without stretching. [4 counted outputs per copy]
  61. Vertical body seam: Match foundation-level bottom to bottom and body-level top to top; keep outside faces outward. The extended backpack flap stays above these body seams. Pair Front and back body panels copy 1 left row ends [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12] with Left and right gussets copy 1 right row ends [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12], respectively. Pin actual lengths before sewing and reinforce without gathering. Repeated references distribute a count mismatch; they do not prove equal physical spans. [12 sewing reference pairs]
  62. Vertical body seam: Match foundation-level bottom to bottom and body-level top to top; keep outside faces outward. The extended backpack flap stays above these body seams. Pair Front and back body panels copy 2 right row ends [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12] with Left and right gussets copy 1 left row ends [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12], respectively. Pin actual lengths before sewing and reinforce without gathering. Repeated references distribute a count mismatch; they do not prove equal physical spans. [12 sewing reference pairs]
  63. Vertical body seam: Match foundation-level bottom to bottom and body-level top to top; keep outside faces outward. The extended backpack flap stays above these body seams. Pair Front and back body panels copy 1 right row ends [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12] with Left and right gussets copy 2 left row ends [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12], respectively. Pin actual lengths before sewing and reinforce without gathering. Repeated references distribute a count mismatch; they do not prove equal physical spans. [12 sewing reference pairs]
  64. Vertical body seam: Match foundation-level bottom to bottom and body-level top to top; keep outside faces outward. The extended backpack flap stays above these body seams. Pair Front and back body panels copy 2 left row ends [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12] with Left and right gussets copy 2 right row ends [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12], respectively. Pin actual lengths before sewing and reinforce without gathering. Repeated references distribute a count mismatch; they do not prove equal physical spans. [12 sewing reference pairs]
  65. Front to base: Read the base front edge from front-left to front-right. Pair Front and back body panels copy 1 foundation posts [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24] with Base panel copy 1 foundation edge posts [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24], respectively. Pin actual lengths before sewing and reinforce without gathering. Repeated references distribute a count mismatch; they do not prove equal physical spans. [24 sewing reference pairs]
  66. Back to base: Read the base back edge from back-left to back-right; reverse the outside-view back-panel numbering. Pair Front and back body panels copy 2 foundation posts [24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1] with Base panel copy 1 top edge posts [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24], respectively. Pin actual lengths before sewing and reinforce without gathering. Repeated references distribute a count mismatch; they do not prove equal physical spans. [24 sewing reference pairs]
  67. Left gusset to base: Read the base left edge from front-left toward back-left. Pair Left and right gussets copy 1 foundation posts [5, 5, 4, 3, 2, 1] with Base panel copy 1 left row ends [1, 2, 3, 4, 5, 6], respectively. Pin actual lengths before sewing and reinforce without gathering. Repeated references distribute a count mismatch; they do not prove equal physical spans. [6 sewing reference pairs]
  68. Right gusset to base: Read the base right edge from front-right toward back-right. Pair Left and right gussets copy 2 foundation posts [1, 1, 2, 3, 4, 5] with Base panel copy 1 right row ends [1, 2, 3, 4, 5, 6], respectively. Pin actual lengths before sewing and reinforce without gathering. Repeated references distribute a count mismatch; they do not prove equal physical spans. [6 sewing reference pairs]
  69. For front and back respectively, attach one handle's foundation end to body final-row positions 2–5 and its last-row end to positions 20–23, four tacks per end. Keep each four-stitch handle untwisted. Pin the real loop height and reinforce all sixteen attachment tacks. Leave the top opening free between handle ends; no load rating is implied. [16 handle-to-rim attachment tacks]
Local design studio · no account required

My Projects